Welcome to our blog about how to put a PS4 in safe mode! There are a lot of times when you need to access safe mode on your console, and we know that it can be tricky. That’s why we’ve created this guide – so that you can avoid any technical pitfalls and make sure your system is running smoothly! So get ready, because we’re about to soar into the wonderful world of PS4 safe mode!
Table of Contents
Introduction to Safe Mode
When your PlayStation 4 (PS4) isn’t working properly, you can use the Safe Mode feature to help troubleshoot and try and fix the issue. This can be done with a few simple steps.
Safe Mode on PS4 helps users enter an alternative menu where they can troubleshoot their console. It allows you to access and run Diagnostic Tests on your hardware, check system information and update System Software from external storage devices.
Once in safe mode, you’ll be able to access System Restore, Rebuild Database, Reinstall PS4 System Software and Initialize PS4 functions which will restore the system’s original factory settings. You’ll also be able to update using a USB drive or internet connection if your console is physically damaged or not getting any response from buttons or other controls.
So how do you put your PS4 into Safe Mode? It’s easy! Follow these simple instructions:
First, turn off the PlayStation 4 by pressing and holding the power button (located on top of the console). Keep holding until you hear two quick beeps – this is an indication that it has successfully entered safe mode.
Now all that’s left is to connect DualShock 4 controller with a USB cable while pressing both L1 + R1 buttons at the same time (DON’T plug it in before handling those buttons!). You should pass by initializing with selected option of choice once connected as normal control should get back.
Benefits of Using Safe Mode
Safe Mode on PlayStation®4 (PS4™) systems provides users with access to the console’s features and a selection of diagnostic and troubleshooting options when faced with technical difficulties. It can also be used to reset passwords or troubleshoot other issues. Utilizing safe mode can help restore the usability of your PS4™ if there are some minor issues that are causing it to malfunction.
The PS4™ menu system can be accessed in safe mode, allowing users to select certain options, either for troubleshooting or for restoring factory settings. Additionally, safe mode allows for re-formatting the hard drive and restoring your system software via USB or disc media.
Using safe mode will also help you remove any corrupt data from system containers such as databases and applications, giving you access to vital functions such as PlayStation Network (PSN) logins and other online gameplay capabilities. Moreover, when entering safe mode, an internet connection is not required in order for data recovery operations to take place.
Luckily, accessing Safe Mode is an easy process as long as you can follow a few simple steps: first make sure that your device is powered off. Once powered off press and hold down the power button until you hear two consecutive beeps; after hearing these two beeps release the power button then press it again one time more and hold it down until a menu appears displaying multiple options including “Restart in Safe Mode”. Highlight this option using your controller’s directional pad then hit “X” on the controller in order to select it; after “Restart in Safe Mode” has been selected wait patiently while your PS4™ device reboot into SAFE MODE!
How to Put Your PS4 into Safe Mode
Safe mode on the PlayStation 4 is a special menu that can help you troubleshoot any problems with your console. It can also be used to boot into a Recovery Menu in order to change or reset system settings or even reinstall the entire operating system. To access Safe Mode, simply press and hold the power button when powering on your PS4; once it powers up, release the power button and then press it again in order for the console to enter Safe Mode.
Once in Safe Mode, you will see a menu showing several options. Here is what each option does:
- Restart PS4 – This will restart your console normally and skip entering Safe Mode next time.
- Change Resolution – This option allows you to switch out different resolutions for your display output.
- Update System Software – This will allow you to update your PlayStation 4’s operating system via internet connection or USB flash drive.
- Rebuild Database – This will initiate a deep scan of your storage unit and repair any errors or corrupt data on the disk.
- Restore Default Settings – This restores all of the console’s settings back to their default values.
- Initialize PS4 (Reinstall System Software) – This removes all of your data from the system and reinstalls a clean version of the operating system, as if it was new out of box condition (your saved data/games/etc won’t be affected).
- Break Down Reporting Tool: You can send usage reports to Sony from this feature if prompted by customer support (it’s only available after using Initialize PS4).
How to put ps4 in safe mode with controller
Using a PS4 in safe mode can help you troubleshoot issues with your gaming console, or even help repair your system if necessary. Enabling safe mode with a controller is a simple process that requires turning off the PS4 and inserting the USB adaptor for the controller.
First, turn off your PS4 and remove any accessories that are connected to it. This includes gaming controllers, power cables and hard drives. Your next step is to connect the USB adaptor for your controller to one of the PS4’s USB ports, then press and hold down the PlayStation button on the controller until it lights up.
Once this happens, turn on your PS4 again by pressing down on its power button until you hear two beeps. At this point, you’ll want to press and hold down the share button on your controller until you see a flashing white light. Now the safe mode menu should come up automatically on your TV screen—if not, select ‘Restart System in Safe Mode,’ which should appear among other options at this stage in the process. From here, select any of several available options within safe mode menu such as “Rebuild Database,” “Reinstall System Software” or “Reset Video Output Settings.” Once you’ve completed what you want to do in safe mode, just select “Restart Normal Mode” before turning off once again (unplugging all related devices) before powering back up again normally!
What to Do Once Your PS4 is in Safe Mode
Once your PS4 has booted into Safe Mode, you’ll have several options to choose from. Depending on the nature of the problem you’re experiencing, one of the following options may be able to resolve it:
Restart System: This option will restart your PS4 normally, without loading any extra settings or configuration files. This can be a helpful starting point if you’re experiencing a minor issue.
Change Resolution: This option will allow you to change the resolution of your display. It can be useful if the display isn’t working correctly or if it is displaying differently than before.
Update System Software: If a system update was interrupted and caused your PS4 to enter safe mode, this option will allow you to complete that update. Note that this requires an internet connection as well as any usb storage device (if necessary) in order for the update process to occur correctly.
Restore Default Settings: This option will restore all system settings back to their factory defaults, which can occasionally help correct minor errors or glitches related to graphics output, sound output or user interface navigation. It does not affect saved games and other user data stored on your hard drive or cloud service.
Rebuild Database: If your console appears slow when navigating menus or taking too long loading games, rebuilding the database can help speed things up by reorganizing information stored on your hard drive in an efficient way while removing any unnecessary clutter and corrupted data files that could be causing issues. However, this is known as a drastic solution with many users hesitating before selecting this option for fear of damaging important files; however, it can often help improve speed when all else fails – just keep in mind that depending on how full your hard drive is it may take quite some time for this process to complete!
Rebuild Database
Rebuild Database is an option that lets you perform a consignment scan of the PS4’s hard drive, as well as creating a new database of all content. This process helps to refresh the system, eliminating corrupted data that may cause conflicts or software errors.
To enter Safe Mode and start the rebuild process:
Turn the system off completely by pressing and holding the power button for 5 seconds until you hear two beeps – one immediately and one after 7 seconds
- Connect your DualShock 4 controller via USB cable
- Press and hold the PlayStation button on your controller for 3 seconds until it begins to flash a light blue color
- While still continuing to press and hold the PlayStation button, press and hold down the SHARE button until your device enters into Safe Mode (you will see an image of a safety helmet appear on screen)
- Select “Rebuild Database” on screen by using your LEFT Joystick on your controller (other navigation options are not available in Safe Mode)
- The process may take up to 48 hours depending on how much data is present but it will continue from where it left off if interrupted during this time
- Once complete, exit Safe Mode by selecting “Restart System” which appears before “Rebuild Database” when entering safe mode
Restore Default Settings
An important part of properly managing the PlayStation 4 console is the ability to enter Safe Mode and use it to solve specific problems. Safe Mode allows you to start the system with basic functions and troubleshoot any more complex issues without having to worry about loss of data or any software errors.
Restoring Default Settings is an option in Safe Mode which will reset all settings, equalizer settings and preset options when selected. This can be helpful when there are audio or display problems while launching games and applications, because it will reset any corrupted settings that affect performance or cause other issues.
To restore in Safe Mode:
- Turn off your PS4 system.
- Hold down the power button until you hear a second beep (approximately 7 seconds).
- When you see the initial boot screen, plug in your Dual Shock 4 controller via USB cable and press any button on the controller once connected to activate it.
- Select “Restore Default Settings” from the menu by pressing X on your controller, then confirm your selection by pressing X again when prompted..
Update System Software
Updating your system software is a crucial step in putting your Playstation 4 in Safe Mode. You can do this by selecting “Settings” from the home screen and then selecting “System Software Update.” This will put the PS4 in an update mode, and it will search for any available firmware updates that may be available for your game console. Once complete, you can then access Safe Mode by pressing the power button of your console for at least 7 seconds until you hear two beeps. This will boot up the console and allow you to access the Safe Mode menu.
Troubleshooting Tips
Before attempting to put your PS4 into safe mode, try some basic troubleshooting steps. If the system is still unresponsive, then you can try putting it into safe mode. First, check the AC power cable and ensure that it is securely connected to both the system and the wall outlet. If the cable appears fine, then unplug it both from the PS4 and wall outlet, then wait for 10-15 seconds before plugging everything back in again. Also make sure that your TV is on the correct input.
If none of those suggestions work and you still cannot get a picture or audio from your PlayStation 4 on your TV screen, you may need to put the system into safe mode in order to possibly diagnose and repair any software issues. Safe mode provides access to options that may help fix issues occurring with software or updating process. To enter safe mode:
- Turn off your PlayStation 4 by pressing and holding down on the power button for about 7 seconds until you hear two beeps (this will indicate that it’s entered rest mode).
- Connect a DualShock 4 controller with a USB cable and press the PS button on the controller
- Select ‘Change Resolution’
- Select ‘Restart PS4’
- Once your PlayStation 4 has restarted and you are met with a ‘Connect controller’ message once more, hold down on both triggers (L2 & R2) as well as both bumpers (L1 & R1) at the same time whilst pressing down on touchpad until you hear another double beep indicating that it has now entered Safe Mode.